OIL PUMP DISASSEMBLY

PROCEDURE


  1. REMOVE FRONT OIL PUMP BODY O-RING


    1. A01LG3M

      Remove the front oil pump body O-ring from the oil pump assembly.

  2. SECURE OIL PUMP ASSEMBLY


    1. A01LB9Q

      Place the oil pump assembly on the torque converter assembly.

  3. REMOVE CLUTCH DRUM OIL SEAL RING


    1. A01LENB

      Remove the 2 clutch drum oil seal rings from the oil pump assembly.

  4. INSPECT OIL PUMP DRIVE GEAR ROTATION

    Click here

  5. REMOVE FRONT OIL PUMP PLATE


    1. A01LGAF

      Using a T30 "TORX" socket wrench, remove the 3 screws and front oil pump plate from the oil pump assembly.

  6. REMOVE STATOR SHAFT ASSEMBLY


    1. A01LFTD

      Using a T30 "TORX" socket wrench, remove the 7 screws and stator shaft assembly from the front oil pump body sub-assembly.

  7. INSPECT STATOR SHAFT ASSEMBLY

    Click here

  8. INSPECT OIL PUMP ASSEMBLY

    Click here

  9. REMOVE FRONT OIL PUMP DRIVE GEAR


    1. A01LB2D

      Remove the front oil pump drive gear from the front oil pump body sub-assembly.

  10. REMOVE FRONT OIL PUMP DRIVEN GEAR


    1. A01LFW3

      Remove the front oil pump driven gear from the front oil pump body sub-assembly.

  11. REMOVE FRONT OIL PUMP OIL SEAL


    1. A01L80IC01
      *a Protective Tape

      Using a screwdriver, remove the front oil pump oil seal from the front oil pump body sub-assembly.

      Note

      Do not damage the bushing or front oil pump body sub-assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  12. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

    Click here