ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH

    1. Put protective tape around the center roof drip side finish moulding.

    2. Using a moulding remover, detach the 2 clips and remove the roof drip side finish moulding.

      Note:

      When removing the roof drip side finish moulding, be careful not to damage the clips.

      B455713E01
      Table 1. Text in Illustration

      *1

      Protective Tape

      -

      -