REAR COMBINATION LIGHT ASSEMBLY(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. REMOVE REAR COMBINATION LIGHT ASSEMBLY

    1. E346421C01
      V100155

      Protective Tape

      Apply protective tape around the rear combination light assembly.

    2. E346422

      Remove the 2 clips.

    3. E346423

      Turn back the luggage compartment trim cover assembly as shown in the illustration.

    4. Disconnect each connector.

    5. Disengage each clamp.

    6. E346424

      Remove the 3 nuts.

    7. E346425

      Disengage the 3 guides and remove the rear combination light assembly as shown in the illustration.