SHIFT LEVER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY

   1. Install the floor shift shift lever assembly with the 4 bolts.

      12 N*m

      122 kgf*cm

      9 ft.*lbf

   2. for LHD:

      1. Attach the 2 wire harness clamps.

   3. for RHD:

      1. Attach the 3 wire harness clamps.

2. CONNECT TRANSAXLE CONTROL CABLE ASSEMBLY

   Click here

3. ADJUST TRANSAXLE CONTROL CABLE ASSEMBLY

   1. Adjust control cable.

      Click here

   2. For new shift lever:

      Remove the stopper pin and dispose of it.

4. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

   Click hereClick here