MASS AIR FLOW METER INSPECTION

PROCEDURE

  1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY

    1. A316500C01

      *a

      Component without harness connected

      (Mass Air Flow Meter Sub-assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      3 (THA) - 2 (E2G)

      -20°C (-4°F)

      12900 to 14700 Ω

      20°C (68°F)

      2300 to 2500 Ω

      60°C (140°F)

      587 to 625 Ω

      If the result is not as specified, replace the mass air flow meter sub-assembly.