TIRE PRESSURE WARNING RESET SWITCH INSPECTION

PROCEDURE

  1. INSPECT TIRE PRESSURE WARNING RESET SWITCH

    1. C239105C05

      *a

      Component without harness connected (Tire Pressure Warning Reset Switch)

      *b

      ON

      *c

      OFF

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 - 2

      On

      Below 1 Ω

      Off

      10 kΩ or higher

      If the result is not as specified, replace the tire pressure warning reset switch.