MASS AIR FLOW METER INSTALLATION

PROCEDURE

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   1. Install the mass air flow meter sub-assembly with the 2 screws.

      Note:

      • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

      • If the mass air flow meter sub-assembly has been struck or dropped, replace it.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

      Tip:

      Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

      Click here

   2. Connect the mass air flow meter sub-assembly connector.