COMPRESSOR(for 1PP) REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

   for HFC-134a (R134a):

   Click here

   for HFO-1234yf (R1234yf):

   Click here

2. REMOVE FRONT BUMPER COVER

   Click here

3. REMOVE FRONT UPPER BUMPER SUPPORT

   Click here

4. REMOVE V-RIBBED BELT

   Click here

5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

   1. 

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

   2. Remove the 2 O-rings from the suction hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

6. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

   1. 

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

   2. Remove the 2 O-rings from the discharge hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

7. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

   1. 

      	Connector
      	Bolt

      Disconnect the connector.

   2. Remove the 3 bolts and compressor assembly with pulley.