REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE REAR BUMPER ASSEMBLY


    1. A005EBDE02
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper assembly.

    2. A005DIJ

      Remove the 2 bolts.

    3. A005DXF

      Using a clip remover, remove the 4 clips.

    4. A005CR9

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. Disengage the 2 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A005DOF

      Disengage the 5 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A005E08

      Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.