GLOW PLUG CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET

   1. Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

2. INSTALL GLOW PLUG CONTROLLER

   1. Connect the 4 glow plug controller connectors.

   2. Install the glow plug controller with the 2 bolts.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

3. INSTALL FRONT BUMPER ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick here