KNOCK SENSOR INSTALLATION

PROCEDURE

1. INSTALL KNOCK SENSOR

   Tech Tips

   Perform "Inspection After Repair" after replacing the knock sensor.

   Click here

   
   

   1. 

      Upper of Vehicle

      Install the knock sensor to the cylinder block sub-assembly with the bolt so that the knock sensor installation position is as shown in the illustration.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      
      

      • If the knock sensor has been struck or dropped, replace it.

      • Make sure that the knock sensor is in the correct position.

   2. Connect the knock sensor connector.

2. INSTALL INTAKE MANIFOLD

   Click here

3. PERFORM INITIALIZATION

   
   

   1. Perform "Inspection After Repair" after replacing the knock sensor.

      Click here