POWER WINDOW REGULATOR MOTOR(for Sedan Rear Side) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. INSTALL REAR DOOR WINDOW REGULATOR ASSEMBLY

    Click here

  2. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  3. INSTALL REAR DOOR QUARTER WINDOW GLASS

    Click here

  4. INSTALL REAR DOOR LOWER WINDOW FRAME SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 1 REAR DOOR VENT SEAL

    Click here

  6. INSTALL REAR DOOR GLASS RUN

    Click here

  7. CONNECT REAR DOOR WEATHERSTRIP

    Click here

  8. INSTALL REAR DOOR SERVICE HOLE COVER

    Click here

  9. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP

    Click here

  10. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  11. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    Click here

  12. INSTALL REAR ARMREST ASSEMBLY

    Click here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick here

  14. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  15. INSPECT POWER WINDOW OPERATION

    Click here