ATF TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

   1. Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.

   2. Coat the 4 bolts with ATF.

   3. 

      *a	Clamp
      *b	Connector

      Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.

      10.8 N*m

      110 kgf*cm

      8 ft.*lbf

      Tip:

      Bolt length:

      Bolt A: 25 mm (0.984 in.)

      Bolt B: 85 mm (3.35 in.)

   4. Connect the connector.

2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

   Click here

3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

   Click here

4. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT LH

   Click here

5. ADD AUTOMATIC TRANSAXLE FLUID

   Click hereClick here

6. ADJUST AUTOMATIC TRANSAXLE FLUID

   Click hereClick here

7. INSTALL REAR ENGINE UNDER COVER LH

   Click hereClick here

8. INSTALL NO. 1 ENGINE UNDER COVER

   Click hereClick here