DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE

  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click hereClick hereClick here

  2. REMOVE TRANSMISSION CASE OIL SEAL

    1. C274362N01

      Using SST, remove the transmission case oil seal from the multi-mode manual transaxle assembly.

      09308-00010

  3. REMOVE TRANSAXLE CASE OIL SEAL

    1. C274368N01

      Using SST, remove the transaxle case oil seal from the multi-mode manual transaxle assembly.

      09308-00010

  4. INSTALL TRANSMISSION CASE OIL SEAL

    1. C274363N01

      Coat the lip of a new transmission case oil seal with MP grease.

    2. Using SST and a hammer, install the transmission case oil seal to the multi-mode manual transaxle assembly.

      09316-60011

      09316-00011

      Standard Depth

      10.6 to 11.6 mm (0.417 to 0.457 in.)

      Note:

      Do not damage the transmission case oil seal lip.

  5. INSTALL TRANSAXLE CASE OIL SEAL

    1. C274369N01

      Coat the lip of a new transaxle case oil seal with MP grease.

    2. Using SST and a hammer, install the front transaxle case oil seal to the multi-mode manual transaxle assembly.

      09630-24014

      09620-24051

      09950-60010

      09951-00410

      09951-00530

      09952-06010

      09950-70010

      09951-07100

      Standard Depth

      1.2 to 2.2 mm (0.0472 to 0.0866 in.)

      Note:

      Do not damage the front transaxle case oil seal lip.

  6. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click hereClick hereClick here