PRE-COLLISION SYSTEM DETAILS PRE-COLLISION SYSTEM CANCEL SWITCH

  1. OPERATION

    1. Pre-collision System Cancel Switch

      1. A pre-collision system cancel switch is provided to disable the system. When pressed and held for approximately 3 seconds, the pre-collision system will be disabled. The system will be displayed for 6 seconds and the PCS warning light will be illuminated. When the switch is pressed again while the system is disabled, the system will be reenabled.

      2. The switch is also used to change the warning timing in 3 levels: far, middle, near. The warning timing changes in the order below each time the switch is pressed.

        Figure 1. Select of Warning Timing
        Y177778C12
        V100135

        Pre-collision system cancel switch is pressed briefly

        		 V100136

        Pre-collision system cancel switch is pressed and held for 3 seconds
        V100138

        Returns to previous screen when the switch is not operated for 6 seconds

        -

        -