IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE

  1. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 1 IGNITION COIL

    1. A321711

      Disconnect the 3 No. 1 ignition coil connectors.

    2. Remove the 3 bolts and 3 No. 1 ignition coils from the cylinder head cover sub-assembly.

      Note:

      If a No. 1 ignition coil has been struck or dropped, replace it.

      Tip:

      Arrange the removed parts in the correct order.

  3. REMOVE SPARK PLUG

    1. A321712C01

      *a

      14 mm Spark Plug Wrench

      Using a 14 mm spark plug wrench, remove the 3 spark plugs from the cylinder head sub-assembly.

      Note:

      If a spark plug has been struck or dropped, replace it.

      Tip:

      Arrange the removed parts in the correct order.