ELECTRONIC SHIFT LEVER SYSTEM DIAGNOSTIC TROUBLE CODE CHART

If a trouble code is displayed during the DTC check, check the circuit listed for that code in the table below and proceed to the appropriate page.

Tech Tips


  • It may not be possible to clear the following DTCs using the GTS: DTC C2300 (Actuator System Malfunction), C2301 (Shift Changing Time Malfunction), C2303 (Short in Power Source Relay Circuit), C2304 (Open or Short Circuit in U Phase), C2305 (Open or Short Circuit in V Phase), C2306 (Open or Short Circuit in W Phase), C2307 (Power Supply) and C2309 (Open in B+ Circuit). In such cases, disconnect the P CON MAIN fuse and wait for at least 60 seconds to clear the DTCs after the repair.

  • When a DTC is detected, the parking lock system warning light comes on and a parking lock system warning message is displayed on the combination meter assembly.

Electronic Shift Lever System
DTC Code Detection Item Parking Lock System Warning Light Parking Lock System Warning Message Memory See page
C2300 Actuator System Malfunction Comes on Comes on DTC stored

Click here

C2301 Shift Changing Time Malfunction Comes on Comes on DTC stored

Click here

C2303 Short in Power Source Relay Circuit Comes on Comes on DTC stored

Click here

C2304 Open or Short Circuit in U Phase Comes on Comes on DTC stored

Click here

C2305 Open or Short Circuit in V Phase Comes on Comes on DTC stored

Click here

C2306 Open or Short Circuit in W Phase Comes on Comes on DTC stored

Click here

C2307 Power Supply Comes on Comes on DTC stored

Click here

C2308 EEPROM Malfunction - - DTC stored

Click here

C2309 Open in B+ Circuit Comes on Comes on DTC stored

Click here

C2310 Open or Short Circuit in Battery Circuit Comes on Comes on DTC stored

Click here

C2311 Communication Error from HV ECU Comes on Comes on DTC stored

Click here

C2315 HV System Comes on Comes on DTC stored

Click here

U0146 Lost Communication with Body ECU - - DTC stored

Click here