PROCEDURE
REMOVE BACK DOOR ASSIST GRIP
Using a screwdriver, detach the 3 claws.
Tech Tips
Tape the screwdriver tip before use.
Remove the 2 screws and assist grip.
REMOVE DOOR ASSIST GRIP
Pull the assist grip in the direction shown by the arrow labeled (1) to disconnect the grip.
Pull out the assist grip to remove it.
REMOVE BACK DOOR TRIM COVER
Using a clip remover, remove the 10 clips and cover.
REMOVE REAR SPOILER (w/ Rear Spoiler)
REMOVE NO. 3 WIRING HARNESS PROTECTOR
Using a clip remover, remove the clip.
Using a screwdriver, detach the 8 claws and remove the No. 13 wiring harness protector and No. 3 wiring harness protector.
Tech Tips
Tape the screwdriver tip before use.
REMOVE NO. 2 WIRING HARNESS PROTECTOR
Detach the claw and remove the cable lever.
Using a clip remover, remove the clip and protector.
Using a screwdriver, detach the 8 claws and remove the No. 12 wiring harness protector and No. 2 wiring harness protector.
Tech Tips
Tape the screwdriver tip before use.
REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
REMOVE LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY
w/ Double Locking System:
Using a clip remover, remove the 5 clamps and cable sub-assembly.
w/o Double Locking System:
Using a clip remover, remove the 6 clamps and cable sub-assembly.
REMOVE LUGGAGE DOOR OPENER CABLE PROTECTOR RH (w/ Double Locking System)
Detach the 2 claws and remove the luggage door opener cable protector.
REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
REMOVE REAR LIGHT LENS AND BODY LH
REMOVE REAR LIGHT LENS AND BODY RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
REMOVE LICENSE PLATE LIGHT ASSEMBLY
REMOVE BACK DOOR OPENER SWITCH ASSEMBLY