TIRE PRESSURE WARNING RESET SWITCH INSPECTION

PROCEDURE

  1. CHECK TIRE PRESSURE WARNING RESET SWITCH

    1. C239105E08

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 - 2

      On

      Below 1 Ω

      1 - 2

      Off

      10 kΩ or higher
      Table 1. Text in Illustration

      *a

      Component without harness connected

      (Tire Pressure Warning Reset Switch)

      *b

      ON

      *c

      OFF

      If the result is not as specified, replace the tire pressure warning reset switch.