OIL LEVEL SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  5. DRAIN ENGINE OIL

    Click here

  6. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY

    Click here

  7. REMOVE ENGINE OIL LEVEL SENSOR


    1. Disconnect the engine oil level sensor connector.

    2. B00859K

      Remove the clip from the engine oil level sensor.

    3. B00878W

      Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from the engine balancer assembly.