| DTC Code | DTC Name |
|---|---|
| B242C | Right Headlight ECU Malfunction |
| B242D | Left Headlight ECU Malfunction |
DESCRIPTION
The headlight ECU sub-assembly LH or headlight ECU sub-assembly RH stores a DTC if it detects an internal malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| B242C | Right Headlight ECU Malfunction |
Detection condition:
Malfunction status:
Malfunction duration: |
Headlight ECU sub-assembly RH | Headlight ECU sub-assembly RH |
| B242D | Left Headlight ECU Malfunction |
Detection condition:
Malfunction status:
Malfunction duration: |
Headlight ECU sub-assembly LH | Headlight ECU sub-assembly LH |
CAUTION / NOTICE / HINT
Note
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
PROCEDURE
CLEAR DTC
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling or HL AutoLeveling (Sub) / Trouble Codes.
Clear the DTCs.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Wait for at least maximum 15 minutes.
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling or HL AutoLeveling (Sub) / Trouble Codes.
Check for DTCs.
| OK |
|---|
| DTC B242C and B242D are not output. |
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| A |
|
USE SIMULATION METHOD TO CHECK Click here |
| B |
|
REPLACE HEADLIGHT ECU SUB-ASSEMBLY RH Click here |
| C |
|
REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH Click here |