REAR SEAT CUSHION HEATER(for 60/40 Split Slide Walk-in Seat Type LH Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

  1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

    1. Remove the rear No. 1 seat assembly (Click here).

  2. REMOVE REAR SEAT UPPER RECLINING COVER LH

    Click here

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  4. REMOVE CENTER SEAT HINGE COVER RH

    Click here

  5. REMOVE REAR SEAT CUSHION MOULDING LH

    Click here

  6. REMOVE SEAT CUSHION COVER WITH PAD

    Click here

  7. REMOVE REAR NO. 2 SEAT PROTECTOR

    Click here

  8. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

    Click here

  9. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY

    B248327C01

    *1

    Tack Pin

    1. Cut off the tack pins and remove the seat cushion heater from the seat cushion cover.