CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

    1. A158220

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A205039

      Install the sensor with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the sensor connector.

  2. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

    1. A158220

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A205040

      Install the sensor with the bolt.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the sensor connector.

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here