HEADLIGHT ASSEMBLY (for LED Headlight) DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE NO. 1 HEADLIGHT BULB

    B007UQP

    1. Turn the No. 1 headlight bulb in the direction indicated by the arrow to remove it.

      Note

      Do not touch the No. 1 headlight bulb glass.

  2. REMOVE NO. 2 HEADLIGHT COVER LH

    B007RZZ

    1. Remove the No. 2 headlight cover LH from the headlight unit LH.

  3. REMOVE FRONT TURN SIGNAL LIGHT SOCKET

    B007UB8

    1. Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow to remove them as a unit.

  4. REMOVE FRONT TURN SIGNAL LIGHT BULB

    B007ONM

    1. Remove the front turn signal light bulb from the front turn signal light socket.

  5. REMOVE CLEARANCE LIGHT BULB

    B007PGU

    1. Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow to disconnect them as a unit.

    2. B007VQU

      Remove the clearance light bulb from the headlight cord.

  6. REMOVE HEADLIGHT LEVELING MOTOR LH

    B007OQQ

    1. Detach the claw and rotate the headlight leveling motor LH in the direction of the arrow shown in the illustration.

    2. B007OMYE01
      Text in Illustration
      *1 Aiming Screw

      Turn the aiming screw of the headlight leveling motor LH in the direction of the arrow shown in the illustration and remove the headlight leveling motor LH.

  7. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING

    B007VSI

    1. Remove the headlight leveling motor base packing from the headlight unit LH.

  8. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH

    B007T8U

    1. Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow to disconnect the headlight light control ECU sub-assembly LH.

    2. B007W22

      Disconnect the connector and remove the headlight light control ECU sub-assembly LH.

  9. REMOVE NO. 1 HEADLIGHT BACK COVER

    B007S46

    1. Remove the screw.

    2. Detach the guide and remove the No. 1 headlight back cover.

  10. REMOVE HEADLIGHT GASKET

    B007PEL

    1. Remove the headlight gasket from the No. 1 headlight back cover.

  11. REMOVE HEADLIGHT CORD

    B007OP9E01
    Text in Illustration
    *1 Grommet

    1. Disconnect the connector.

    2. Detach the 3 guides.

    3. Disconnect the grommet and remove the headlight cord.