FRONT DRIVE SHAFT ASSEMBLY(for 1PP) COMPONENTS
ILLUSTRATION
*1 |
FRONT AXLE SHAFT NUT |
*2 |
FRONT DISC |
*3 |
FRONT DISC BRAKE CALIPER ASSEMBLY |
*4 |
FRONT DRIVE SHAFT ASSEMBLY |
*5 |
FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY |
*6 |
FRONT SPEED SENSOR |
*7 |
FRONT STABILIZER BAR |
*8 |
HEXALOBULAR SCREW |
*9 |
TIE ROD END SUB-ASSEMBLY |
*10 |
FRONT FLEXIBLE HOSE |
*11 |
FRONT SHOCK ABSORBER ASSEMBLY |
*12 |
FRONT AXLE ASSEMBLY |
*13 |
FRONT STABILIZER CUSHION |
*14 |
NO. 1 CUSHION RETAINER |
*15 |
COTTER PIN |
*16 |
FRONT STABILIZER BOLT |
 |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
 |
Do not apply lubricants to the threaded parts |
- |
- |
ILLUSTRATION
*1 |
FRONT DRIVE SHAFT ASSEMBLY LH |
*2 |
FRONT DRIVE SHAFT ASSEMBLY RH |
ILLUSTRATION
*A |
for LH Side |
- |
- |
*1 |
FRONT AXLE INBOARD JOINT BOOT |
*2 |
FRONT AXLE INBOARD JOINT BOOT CLAMP |
*3 |
FRONT AXLE OUTBOARD JOINT BOOT |
*4 |
FRONT AXLE OUTBOARD JOINT BOOT CLAMP |
*5 |
FRONT DRIVE INBOARD JOINT ASSEMBLY |
*6 |
FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP |
*7 |
FRONT NO. 2 AXLE OUTBOARD JOINT BOOT CLAMP |
*8 |
SHAFT SNAP RING |
*9 |
TRIPOD JOINT |
*10 |
FRONT DRIVE OUTBOARD JOINT SHAFT ASSEMBLY |
*11 |
INBOARD JOINT SPRING |
- |
- |
● |
Non-reusable part |
- |
- |
ILLUSTRATION
*A |
for RH Side |
- |
- |
*1 |
FRONT AXLE INBOARD JOINT BOOT |
*2 |
FRONT AXLE INBOARD JOINT BOOT CLAMP |
*3 |
FRONT AXLE OUTBOARD JOINT BOOT |
*4 |
FRONT AXLE OUTBOARD JOINT BOOT CLAMP |
*5 |
FRONT DRIVE INBOARD JOINT ASSEMBLY |
*6 |
FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP |
*7 |
FRONT NO. 2 AXLE OUTBOARD JOINT BOOT CLAMP |
*8 |
SHAFT SNAP RING |
*9 |
TRIPOD JOINT |
*10 |
FRONT DRIVE OUTBOARD JOINT SHAFT ASSEMBLY |
*11 |
INBOARD JOINT SPRING |
- |
- |
● |
Non-reusable part |
- |
- |