STEERING PAD SWITCH INSTALLATION

PROCEDURE

1. INSTALL STEERING PAD SWITCH ASSEMBLY

   1. Attach the 6 claws and 2 pins to install the pad switch assembly.

   2. Install the 2 screws.

   3. Connect the connector to the spiral cable.

      Tip:

      If the vehicle is equipped with a cruise control switch and shift paddle switch, connect their connectors and connector clamps.

2. INSTALL STEERING PAD

   for Single Type:Click here

   for Dual Type:Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick here).

4. CHECK SRS WARNING LIGHT

   w/ Occupant Classification System:Click here

   w/o Occupant Classification System:Click here