FRONT BUMPER(except Sport Package) REMOVAL

CAUTION / NOTICE / HINT

w/ Dynamic Radar Cruise Control System:

Tech Tips

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

Click here

PROCEDURE


  1. PRECAUTION (w/ Panoramic View Monitor System)

    Click here

  2. REMOVE RADIATOR SUPPORT OPENING COVER


    1. B008HOO

      Remove the 10 clips and radiator support opening cover.

  3. REMOVE RADIATOR GRILLE PROTECTOR


    1. B008H24

      Remove the 2 radiator grille protectors.

  4. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH (for Front Fender)

    Click here

  5. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH (for Front Fender)

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE NO. 1 MOULDING TAPE (for Front Fender)

    Click here

  7. REMOVE NO. 2 MOULDING TAPE (for Front Fender)

    Click here

  8. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH


    1. B008HHJ

      Remove the 5 screws and front fender front splash shield LH.

  9. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE FRONT BUMPER ASSEMBLY


    1. B008HGQ

      Remove the 6 screws.

    2. B008IGJC02
      B008HF7 Protective Tape

      Put protective tape around the front bumper cover.

    3. B008HMQ

      Remove the 2 clips.

    4. B008HK1

      Remove the 2 bolts.

    5. Detach the 10 claws and remove the front bumper assembly.

      B008I0O

    6. w/ Headlight Cleaner System:


      1. Disconnect the headlight washer hose, and then drain the washer fluid.

        Tech Tips

        Use a container to collect the washer fluid.

    7. w/ Fog Light:

      Disconnect the 2 fog light connectors.

    8. Disconnect the 2 clearance light connectors.

    9. w/ LEXUS Parking Assist-sensor System:

      Disconnect the 2 No. 3 engine room wire connectors.

    10. w/o LEXUS Parking Assist-sensor System:

      Disconnect the No. 3 engine room wire connector.

  11. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. B008HYT

      Remove the front bumper energy absorber.

  12. REMOVE FRONT BUMPER LOWER ABSORBER


    1. B008ITT

      Remove the 8 screws and the front bumper lower absorber.

  13. REMOVE LOWER RADIATOR AIR GUIDE PLATE


    1. B008I4G

      Detach the 2 clips and remove the lower radiator air guide plate.

  14. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. B008I8T

      Detach the 4 clamps and disconnect the engine room main wire.

    2. B008HGL

      Remove the 6 bolts and the front bumper reinforcement sub-assembly.

  15. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. B008GX1C03
      *a 90°

      Remove the 2 screws.

    2. Using a screwdriver, turn the clip 90° and detach the clip.

    3. Detach the claw and remove the front bumper side retainer LH.

  16. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.