REGISTER ILLUMINATION(for Driver Side) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. B005U9IC03
      *a

      Component without harness connected

      (No. 1 Instrument Panel Register Assembly)

      Inspect the No. 1 instrument panel register assembly.

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition

      G3-2(ILL+) - Battery positive (+)

      G3-3(ILL-) - Battery negative (-)

      		 illuminates

      If the result is not as specified, replace the No. 1 instrument panel register assembly.