HEATED STEERING WHEEL CONTROLLER REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing the steering wheel (Click hereClick here).

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note:

    • After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  2. REMOVE NO. 3 STEERING WHEEL LOWER COVER

    Click here

  3. REMOVE NO. 2 STEERING WHEEL LOWER COVER

    Click here

  4. REMOVE STEERING PAD ASSEMBLY

    Click here

  5. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY

    1. C149026

      Disconnect the 2 connectors.

    2. Remove the 2 screws and controller.