OIL PRESSURE SWITCH INSPECTION

PROCEDURE

1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

   1. Disconnect the engine oil pressure switch assembly connector.

   2. Start the engine.

   3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection	Condition	Specified Condition
      1 - Switch body	Idling	10 kΩ or higher
      	Engine stopped	Below 1 Ω

      If the result is not as specified, replace the engine oil pressure switch assembly.

   4. Connect the engine oil pressure switch assembly connector.