LIGHTING SYSTEM, Diagnostic DTC:B2452

DTC Code DTC Name
B2452 Height Control Sensor Data Out of Range When Initializing

DESCRIPTION

The headlight leveling ECU stores this DTC if the sensor value received from the height control sensor is out of range when performing initialization of the headlight leveling ECU; for example, the vehicle is not level or is being jacked up.

DTC Code

DTC Detection Condition

Trouble Area

B2452

Value from height control sensor is out of the normal range when initializing.

  • Vehicle condition when initializing

  • Headlight leveling ECU assembly

CAUTION / NOTICE / HINT

Tip:

After replacing the headlight leveling ECU, initialization of the ECU is necessary (Click here).

PROCEDURE

  1. PERFORM HEADLIGHT LEVELING ECU INITIALIZATION

    1. Perform initialization of the headlight leveling ECU (Click here).

      Tip:

      • Before initializing, make sure that the vehicle condition is proper for initialization.

      • Be sure to perform the initialization as instructed.

  2. CHECK FOR DTC

    1. Check for DTCs (Click here).

      Table 1. Result

      Result

      Proceed to

      B2452 is not output

      A

      B2452 is output (for LHD)

      B

      B2452 is output (for RHD)

      C
      Tip:

      If the headlight leveling ECU sets B2452 even though the ECU has been initialized as instructed, there may be a malfunction in the headlight leveling ECU.

    END

    REPLACE HEADLIGHT LEVELING ECU ASSEMBLY

    (Click here)

    REPLACE HEADLIGHT LEVELING ECU ASSEMBLY

    (Click here)