FRONT BRAKE REASSEMBLY

PROCEDURE

  1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

    Tip:

    Fully tighten the front disc brake bleeder plug after bleeding the system.

  2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

  3. INSTALL PISTON SEAL

    1. C211755C13
      V100155

      Lithium Soap Base Glycol Grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.

    2. Install the piston seal to the front disc brake cylinder.

      Note:

      Securely install the piston seal into the groove of the front disc brake cylinder.

  4. INSTALL FRONT DISC BRAKE PISTON

    1. C302520C01

      *1

      Cylinder Boot

      *2

      Front Disc Brake Piston
      V100155

      Lithium Soap Base Glycol Grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.

    2. Install the cylinder boot to the front disc brake piston.

      Note:

      Securely install the cylinder boot into the groove of the front disc brake piston.

    3. Apply a light layer of lithium soap base glycol grease to the contact surfaces of the front disc brake piston, and install it to the front disc brake cylinder.

      Note:

      Do not forcibly install the front disc brake piston into the front disc brake cylinder.

  5. INSTALL CYLINDER BOOT

    1. C302521C01

      *1

      Front Disc Brake Piston

      *2

      Front Disc Brake Cylinder

      *3

      Cylinder Boot

      Using SST and a hammer, install the cylinder boot to the front disc brake cylinder.

      09710-30050

      09950-70010

      09951-07100

      Note:

      • Securely install the cylinder boot to the groove of the front disc brake cylinder.

      • Do not damage the cylinder boot.