TRANSMISSION REVOLUTION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL TRANSMISSION REVOLUTION SENSOR

    1. Install the transmission revolution sensor to the multi-mode manual transaxle assembly with the bolt.

      7.8 N*m

      80 kgf*cm

      69 in.*lbf

    2. Clean and degrease the bolt and installation hole in the manual transmission case.

    3. A192239C84

      *a

      Adhesive

      Coat the threads of the bolt with adhesive and install the transmission case protector to the multi-mode manual transaxle assembly with the bolt.

      18.1 N*m

      185 kgf*cm

      13 ft.*lbf

      Adhesive

      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

      Note:

      In order to ensure proper installation of the bolt, apply adhesive to the bolt and install it within 10 minutes of adhesive application.

    4. Engage the wire harness clamp.

    5. Connect the transmission revolution sensor connector.

  2. ADD MANUAL TRANSAXLE OIL

    Click here

  3. INSPECT FOR OIL LEAK