HEADLIGHT ASSEMBLY(for LED Headlight) DISASSEMBLY

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE FRONT TURN SIGNAL LIGHT SOCKET

    E332598C01

    *a

    Matchmark

    *b

    Unlock Position Mark

    1. Turn the front turn signal light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the front turn signal light socket.

  2. REMOVE FRONT TURN SIGNAL LIGHT BULB

    E273985

    1. Remove the front turn signal light bulb from the front turn signal light socket.

  3. REMOVE NO. 1 HEADLIGHT ECU SUB-ASSEMBLY LH

    Note:

    If the light control ECU is removed, make sure to replace the headlight gasket with a new one.

    1. E349058C01

      *a

      Matchmark

      *b

      Unlock Position Mark

      Turn the ECU base counterclockwise until the matchmark is aligned with the unlock position mark to remove the ECU base.

    2. E349060

      Disconnect the connector.

    3. E349061

      Remove the 2 screws and No. 1 headlight ECU sub-assembly LH from the ECU base.

  4. REMOVE HEADLIGHT GASKET

    1. E349345

      Remove the headlight gasket from the ECU base.

      Note:

      If the headlight gasket is removed, replace it with a new one.