NAVIGATION SYSTEM(for HDD) Cursor or Map Rotates when Vehicle Stopped

DTC Code DTC Name
Cursor or Map Rotates when Vehicle Stopped

PROCEDURE

  1. CHECK CONDITION

    1. E106418

      Check with the customer if the vehicle has been turned by a turntable.

      Tip:

      If the vehicle is turned on a turntable with the engine switch on (IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the engine switch off and back on (IG) again with the vehicle completely stopped.

    Result

    Proceed to

    Vehicle has not been turned by a turntable

    Vehicle has been turned by a turntable
    Vehicle has not been turned by a turntable

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click here

    Vehicle has been turned by a turntable

    TURN ENGINE SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED