HEATED OXYGEN SENSOR INSPECTION

PROCEDURE


  1. INSPECT HEATED OXYGEN SENSOR


    1. B008GMLC12
      *a

      Component without harness connected

      (Heated Oxygen Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (HA1B) - 1 (+B) 20°C (68°F) 11 to 16 Ω
      2 (HA1B) - 3 (A1B-) Always 10 kΩ or higher

      If the result is not as specified, replace the heated oxygen sensor.