TURN SIGNAL FLASHER ASSEMBLY(for RHD) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT TURN SIGNAL FLASHER ASSEMBLY


    1. A004OA8E03
      Text in Illustration
      *1

      Component with harness connected

      (Turn Signal Flasher Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      D106-7 (E) - Body ground Always Below 1 Ω

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      D106-1 (IG) - D106-7 (E) Ignition switch ON 11 to 14 V
      D106-2 (LR) - D106-7 (E) Hazard warning switch off Below 1 V
      Hazard warning switch on

      Alternates between 11 to 14 V and below 1 V

      (60 to 120 times per minute)
      D106-3 (LL) - D106-7 (E) Hazard warning switch off Below 1 V
      Hazard warning switch on

      Alternates between 11 to 14 V and below 1 V

      (60 to 120 times per minute)
      D106-4 (B) - D106-7 (E) Always 11 to 14 V
      D106-5 (EL) - D106-7 (E)

      Ignition switch ON

      Headlight dimmer switch (turn left) off

      		 9 V or higher

      Ignition switch ON

      Headlight dimmer switch (turn left) on

      		 Below 1 V
      D106-6 (ER) - D106-7 (E)

      Ignition switch ON

      Headlight dimmer switch (turn right) off

      		 9 V or higher

      Ignition switch ON

      Headlight dimmer switch (turn right) on

      		 Below 1 V
      D106-8 (HAZ) - D106-7 (E) Hazard warning switch off 9 V or higher
      Hazard warning switch on Below 1 V

      If the result is not as specified, there may be a malfunction in the turn signal flasher.