REAR CENTER SEAT OUTER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A001SDHC01
      *a Retractor
      *b 0°
      *c 20°
      *d Unlock
      *e Lock

      Before installing the rear center seat outer belt assembly, check the ELR function.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is between 0° and 20°, check that the belt can be pulled from the retractor. When the inclination of the retractor is less 0° or more than 20°, check that the belt locks.

        If the result is not as specified, replace the rear center seat outer belt assembly.