HEADLIGHT ASSEMBLY(for Halogen Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY


    1. A001YDTC01
      B008LJK Install in this Direction

      Temporarily install the headlight assembly as shown in the illustration.

    2. Install the headlight assembly with the bolt and 3 screws.

      Torque:
      Bolt
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect the 3 connectors.

    4. Remove the protective tape.

  2. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  3. PERFORM INITIALIZATION

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here