POWER WINDOW REGULATOR MOTOR(for Sedan Front Side) INSTALLATION
CAUTION / NOTICE / HINT
Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
PROCEDURE
PRECAUTION
Note:After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY
INSTALL FRONT DOOR GLASS SUB-ASSEMBLY
INSTALL FRONT DOOR SERVICE HOLE COVER
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH
INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
INSTALL FRONT ARMREST ASSEMBLY
INSTALL DOOR ASSIST GRIP COVER
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note:When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
INITIALIZE POWER WINDOW CONTROL SYSTEM
INSPECT POWER WINDOW OPERATION