SHIFT LEVER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FLOOR SHIFT LEVER ASSEMBLY

   1. Install the floor shift lever assembly with the 4 bolts.

      12 N*m

      122 kgf*cm

      9 ft.*lbf

2. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

   1. 

      Engage the 2 claws, and install the transmission control cable assembly to the floor shift lever assembly.

      Note:

      Make sure that the claws are firmly engaged.

   2. Install the transmission control shift cable to the floor shift lever assembly.

   3. Connect the transmission control select cable to the floor shift lever assembly and install the clip.

      Note:

      • Make sure the lock piece of the transmission control select cable is facing upward when the transmission control select cable is connected.

      • Make sure that the transmission control select cable is securely installed.

   4. Install the wire harness to the shift lever assembly with the 4 clamps.

3. ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

   Click here

4. INSTALL REAR CONSOLE BOX ASSEMBLY

   Click here