AUTOMATIC TRANSAXLE SYSTEM


  1. CONSTRUCTION


    1. The transmission control switch is installed inside the transmission floor shift assembly to detect the M mode position and inform the ECM. The ECM indicates the shift position indicator M in the combination meter assembly via CAN.

    2. The transmission control switch detects whether the shift lever is in D or M, detects whether the shift lever is moved to "+" (upshift) or "-" (downshift) when the M mode is selected, and sends signals to the ECM. At this time, the ECM indicates the selected gear position in the combination meter assembly via CAN.

    3. On models with shift paddle switch (transmission shift switch assembly), the shift paddle switch (transmission shift switch assembly) is installed in the steering wheel. The ECM detects the operation of the shift paddle switch (transmission shift switch assembly) is "+" (upshift) or "-" (downshift) when the shift lever is in D or M.

      Figure 1. LHD Models

      A01VQZAC01
      *A Models with Shift Paddle Switch (Transmission Shift Switch Assembly) - -
      *1 Transmission Floor Shift Assembly *2 Transmission Control Switch
      *3 Shift Paddle Switch (Transmission Shift Switch Assembly) - -

      Figure 2. RHD Models

      A01VR30C01
      *A Models with Shift Paddle Switch (Transmission Shift Switch Assembly) - -
      *1 Transmission Floor Shift Assembly *2 Transmission Control Switch
      *3 Shift Paddle Switch (Transmission Shift Switch Assembly) - -