EGR BYPASS VALVE SWITCHING VALVE INSPECTION

PROCEDURE

  1. INSPECT NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      20°C (68°F)

      28.3 to 31.1 Ω
    2. A114883C03
      V100135

      Air

      Check No. 1 vacuum switching valve assembly operation.

      1. Check that air does not flow from port A to port B.

      2. A114884C03
        V100135

        Air

        Apply battery voltage across terminals 1 and 2 as shown in the illustration.

      3. Check that air flows from port A to port B.

        If the result is not as specified, replace the No. 1 vacuum switching valve assembly.