DOOR CONTROL RECEIVER REMOVAL

PROCEDURE

  1. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here

  2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  3. REMOVE DECK BOARD ASSEMBLY

    Click here

  4. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  5. REMOVE REAR NO. 2 FLOOR BOARD

    Tip:

    Use the same procedure described for the rear No. 3 floor board side.

  6. REMOVE DECK TRIM SIDE COVER BASE LH

    Click here

  7. REMOVE DECK FLOOR BOX LH

    Click here

  8. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

    Click here

  9. REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

    Click here

  10. REMOVE REAR DECK TRIM COVER (for Full Size Spare Tire)

    Click here

  11. REMOVE REAR SEAT ASSEMBLY

    Click here

  12. REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

  13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

  14. REMOVE DECK TRIM SERVICE HOLE COVER

    Click here

  15. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  16. REMOVE SEAT BELT ANCHOR COVER CAP

    Click here

  17. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

    Click here

  18. REMOVE DOOR CONTROL RECEIVER (w/o Tire Pressure Warning System)

    1. B337035

      Disconnect the connector.

    2. Remove the bolt and door control receiver.

  19. REMOVE DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)

    1. B343070

      Disconnect the connector.

    2. Remove the bolt and door control and tire pressure monitoring system receiver assembly.