FRONT SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (DRIVER SEAT)

    1. B371346C01

      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (Driver Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Driver seat belt unfastened

      Below 1 Ω

      Driver seat belt fastened

      10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (driver seat).

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FRONT PASSENGER SEAT)

    1. B371363C01

      *A

      for LHD

      *B

      for RHD

      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (Front Passenger Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Table 1. for LHD

      Tester Connection

      Condition

      Specified Condition

      K30-1 - B-1

      Always

      Below 1 Ω

      K30-2 - B-2

      Front passenger seat belt unfastened

      Below 1 Ω

      Front passenger seat belt fastened

      10 kΩ or higher
      Table 2. for RHD

      Tester Connection

      Condition

      Specified Condition

      K24-1 - B-1

      Always

      Below 1 Ω

      K24-2 - B-2

      Front passenger seat belt unfastened

      Below 1 Ω

      Front passenger seat belt fastened

      10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (front passenger seat).