FRONT SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FOR DRIVER)


    1. A005AG4E04
      Text in Illustration
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Driver))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Driver seat belt unfastened Below 1 Ω
      2 - 3 Driver seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (for Driver).

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FOR FRONT PASSENGER)


    1. A005B44E02
      Text in Illustration
      *A for LHD
      *B for RHD
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Front Passenger))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      S23-3 - B-1 Always Below 1 Ω
      S23-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
      S23-2 - B-3 Front passenger seat belt fastened 10 kΩ or higher
      for RHD
      Tester Connection Condition Specified Condition
      R33-3 - B-1 Always Below 1 Ω
      R33-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
      R33-2 - B-3 Front passenger seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (for Front Passenger).