MONOLITHIC CONVERTER(w/o DPF) INSTALLATION

PROCEDURE


  1. INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. Set a new gasket and the exhaust manifold converter sub-assembly to the turbocharger sub-assembly.

    2. Temporarily install the exhaust pipe support stay to the cylinder block sub-assembly and exhaust manifold converter sub-assembly with the 3 bolts.

    3. B002679C01
      *1 Exhaust Pipe Clamp
      *2 Exhaust Manifold Converter Sub-assembly
      *3 Turbocharger Sub-assembly
      *4 Gasket

      Install a new exhaust pipe clamp to the exhaust manifold converter sub-assembly with a new nut.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

    4. Tighten the 3 bolts and install the exhaust pipe support stay to the cylinder block sub-assembly and exhaust manifold converter sub-assembly.

      Torque:
      38 N*m  { 387 kgf*cm, 28 ft.*lbf }

  2. INSTALL NO. 2 EXHAUST PIPE SUPPORT STAY


    1. Install the No. 2 exhaust pipe support stay to the cylinder block sub-assembly and exhaust manifold converter sub-assembly with 2 new nuts and the bolt.

      Torque:
      38 N*m  { 387 kgf*cm, 28 ft.*lbf }

  3. INSTALL NO. 1 TURBO INSULATOR


    1. Install the No. 1 turbo insulator to the exhaust manifold and turbocharger sub-assembly with the 3 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  4. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. Install the No. 1 exhaust manifold heat insulator to the exhaust manifold with the 3 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  5. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here