POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) OPERATION CHECK
CHECK WINDOW LOCK SWITCH
Tip:Before performing the window lock switch operation check, make sure that the window lock switch is off (the switch is not pushed in).
Check that the front passenger and rear windows cannot be operated when the window lock switch of the power window regulator master switch assembly is pushed in.
OK
Front passenger and rear windows are disabled.
Check that the front passenger and rear windows can be operated when the window lock switch of the power window regulator master switch assembly is pushed again.
OK
Front passenger and rear windows operate normally.
CHECK MANUAL UP/DOWN FUNCTION
Check that the driver door power window operates as follows:
Table 1. OK Condition
Master Switch
Switch Operation
Power Window
Ignition switch ON
Driver door
Pulled up
UP (Closes)
Pushed halfway down
DOWN (Opens)
Check that the front passenger door window and rear power windows operate as follows:
Table 2. OK Condition
Regulator Switch
Switch Operation
Power Window
Ignition switch ON
Window lock switch off
Front passenger door
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
Rear LH door
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
Rear RH door
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
CHECK AUTO DOWN FUNCTION
Check that the driver door power window operates as follows:
Table 3. OK Condition
Master Switch
Switch Operation
Power Window
Ignition switch ON
Driver door
Pushed down (One touch operation)
AUTO DOWN (Opens)
CHECK REMOTE MANUAL UP/DOWN FUNCTION
Check that the front passenger door window and rear power windows operate as follows:
Table 4. OK Condition
Master Switch
Switch Operation
Power Window
Ignition switch ON
Window lock switch off
Front passenger door
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
Rear LH door
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
Rear RH door
Pulled up
UP (Closes)
Pushed down
DOWN (Opens)
CHECK POWER WINDOW REGULATOR MASTER SWITCH LED ILLUMINATION
Check the LED illumination (power window regulator master switch assembly).
Check that the LED located in the power window regulator master switch assembly illuminates when the ignition switch is turned to ON.