REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT LENS AND BODY (for Bulb Type Back-up Light)

  2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE (for Bulb Type Back-up Light)


    1. B0087ON

      Connect the connector.

    2. Engage the 2 clamps to install the rear combination light socket and wire.

  3. INSTALL REAR COMBINATION LIGHT CORD (for LED Type Back-up Light)


    1. B0089DN

      Connect the connector.

    2. Engage the 2 clamps to install the rear combination light cord.

  4. INSTALL REAR TURN SIGNAL LIGHT BULB (for Bulb Type Back-up Light)


    1. Install the rear turn signal light bulb to the rear combination light socket and wire.

    2. B008899C01
      B00847Z Install in this Direction

      Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to install them as a unit.

  5. INSTALL REAR COMBINATION LIGHT GASKET (for Bulb Type Back-up Light)


    1. B0084AQ

      Install a new rear combination light gasket.

  6. INSTALL REAR COMBINATION LIGHT LED (for Bulb Type Back-up Light)


    1. B00877WC01
      B00847Z Install in this Direction

      Turn the rear combination light LED as shown in the illustration to temporarily install it.

    2. B0084YA

      Install the rear combination light LED with the screw.

    3. Connect the connector.