MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)


    1. A001UCHC01
      *1 Vacuum Hose
      *a Protrusion
      *b Hole

      Align the protrusion of the vacuum sensor bracket with the hole of vacuum sensor assembly (manifold absolute pressure sensor).

    2. Install the vacuum sensor assembly (manifold absolute pressure sensor) with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If the vacuum sensor assembly (manifold absolute pressure sensor) has been struck or dropped, replace it.

    3. Connect the vacuum hose and vacuum sensor assembly (manifold absolute pressure sensor) connector to the vacuum sensor assembly (manifold absolute pressure sensor).

  2. INSTALL NO. 2 CYLINDER HEAD COVER

    Click here